Discussion on how to install the ceiling of carbonized wood
Stud, pencil, chalk line, miter saw, ladder, anticorrosive wood, building glue, pneumatic nail gun, curve saw, table saw。
Bijie anticorrosion wood small editor today talks about the construction process of the hanging roof of the carbonized wood factory
1. The stud found in the stud is located in the ceiling keel. The grille marks and captures the chalk lines for each line with a pencil. This will make the grid easy to see. As long as it is possible, the plank is installed vertically on the ceiling keel. This will make the sling of carburized wood stronger.
2. The upper limit of the length of the measurement. How long it will help, you need a good idea for each ceiling carbonized board. As you use the tongues and grooves of the carbonized wood, you will need to cut off the trestle from the side and butt the tongue on the wall. Both ends of saw cutting boards are used carbide chamfered.
3, the structural adhesive of the bead is applied to the first carbonated wood board to be installed. Stand on the ladder, and the carburized wood is pushed to the wall next to it. Carefully pull the carbonized board down and then push it up. This will help the structural adhesives spread evenly to the rear trestle. A pneumatic gun is used to nail the carburized board into a ceiling keel.
4. In the same way, you install the first carbonized board and install all the boards. However, with the continuous board, you need to make sure that you put your tongue into the slots. This will strengthen the board. Just as you go to the board of measuring and marking the lamps and ceiling obstacles and sawing the size of the anticorrosion wood ceiling with the jig.
5, measure and cut the last line of the carburized board. The most likely board in the last row is less than the whole board. Measure the size of the plate and tear the tearing board on the table. You will need to cut the bottom of the lip groove from the upper plate so that the last carbonized wood is easy to drop, even in a narrow space.
Bijie preservative wood little editor is here today.